| My Current project, 72 Chevelle Pro Touring car. |
| Front suspension removed. |
| Rear Axle Before |
| Rear Axle After 4.11 Richmond gear with a Auburn posi unit inside and all new bearings and seals. |
| Suspension Painted and put together March 29 2007. Yes Thats a Ford engine in the background! |
| Detail of Late model Jeep Grand Cherokee Steering box and Hotchkis components. Every piece of suspension is new, epoxy primed then painted. Every piece of the car will be new or sandblasted and refinished. |
| The work continues March 2 2007 |
| April 2nd Mocking up all of the sheet metal for fit. |
| Inside of the doors were coated in epoxy primer before the skins go on. |
| Main shell and trunk were started on years ago (1998) and I burnt myself out on working on cars! |
| Ok I cheated! I put the Raamat sound deadener in before I put the skin on the shell |
| A peak at the sound deadener through a large hole in the shell. |
| Completed door on the car, what a horrible fit!!!! I will have many hours of fitting, bending and tweaking stuff till im happy! |
| This shot shows some of the waves in the door. |
| After 6 hours (per door) of prying bending and welding....those goodmark panels do fit!!! |
| Dash was taken out so this area can be cleaned up and sound deadened. Plus I don't have to worry about sparks or overspray. |
| Nice straight lines, a lot of work to get the head light buckets to fit perfect. |
| After 3 plus days of fitting....It came back apart in less than 10 minutes! Here is the hood being striped and the big block laying in the background, ready for machine work. |
| Mocking up all of the cooling, condenser and tranny cooler...Almost ready to start! |
| Notice checkbook on top of right cowl, were having fun now! |
| It now moves (and stops) under its own power! |
| Lots of painted parts! |